Vol. 2 No. 1 (2021): PEAT

Articles

• Optimisation of Tensile Strength by Means of Taguchi and Response Surface Methods For Silicone Dielectric Elastomer

  Siti Hazar Jebin, Aliff Hisyam A Razak

  1-11

  • PDF 311
  • Abstract View  232

• A Systematic Review: Optimization of Extracts Psidium Guajava L. By Using Ultrasound-Assisted with Soxhlet Extraction in Application of Food Preservation

  Nur Aqidah Mohd Rozlan, Nasrul Fikry Che Pa

  12-26

  • PDF 492
  • Abstract View  449

• Optimisation of droplet size and pH for cosmeceutical cream containing virgin coconut oil (VCO)

  Nurul Syahirah Rulhisham, Aliff Hisyam A Razak

  27-37

  • PDF 408
  • Abstract View  494

• Production of Smokeless Biofuel Briquettes from Palm Kernel Shell Assisted with Slow Pyrolysis Treatment

  Nurul Alia Mohamad Azman, Nasrul Fikry Che Pa

  38-49

  • PDF 724
  • Abstract View  834

• Fouling Mechanism of Ultrafiltration Polypiperazine Amide Membrane during Catalytic Conversion of Thiophene in Petroleum Fraction via Hybrid Membrane Photocatalytic Reactor (MPR)

  Faatihah Abdullah, Nur Hanis Hayati Hairom

  50-61

  • PDF 262
  • Abstract View  192

• Potential of Banana Stem as Bio-adsorbent for Palm Oil Mill Effluent (POME) Treatment: A Systematic Literature Review

  Muhammad Nur Hafizuddin Khamis, Mas Rahayu Jalil

  62-73

  • PDF 420
  • Abstract View  519

• Characterization of Activated Carbon Fibre Derived from Palm Empty Fruit Bunch Waste and Cassava Stem for Urea Adsorption

  Nasuha Amran, Nasrul Fikry Che Pa

  74-84

  • PDF 383
  • Abstract View  292

• Comparison of Natural Fibers as Acoustic Panels

  Nor Azwa Yasmin Mohd Azhar, Abdul Zaki Abdul Wahid

  85-91

  • PDF 657
  • Abstract View  969

• Proposed Design of Disabled Parking Management System using RFID Sensor Technology

  ADLAN ZARIF JAMARUDIN, Rahmat Muslim

  92-101

  • PDF 941
  • Abstract View  584

• Efficiency of Dual Functional Fat, Oil and Grease (FOG) Trap in Treating Kitchen Wastewater

  Siti Nur Fatehah Ibrahim Idham

  102-111

  • PDF 544
  • Abstract View  478

• A Study on Indoor Air Quality (IAQ) of University Libraries in Malaysia

  Nurul Aina Shasha Ja'afar, Abdul Zaki Abdul Wahid

  112-124

  • PDF 818
  • Abstract View  658

• Finite Element Analysis on Cube and Cylinder Model of Ceramic Waste Concrete

  Muhammad Iqbal Zamri, Wan Amizah Binti Wan Jusoh, Mohamad Hairi Bin Osman

  125-142

  • PDF 403
  • Abstract View  429

• Community's Attitude and Behavior towards Food Waste Composting

  SITI HAJAR ABDUL WAHAB, FATIMAH MOHAMED YUSOP, TUAN NOOR HASANAH TUAN ISMAIL

  143-150

  • PDF 490
  • Abstract View  470

• The Development of Plastic Concrete Mix with Recycled Plastic (HDPE) in Concrete Production for Flat Roof of Sustainable Building

  Kok Wei Huan, Mohd Fahmi bin Abdul Rahman

  151-156

  • PDF 242
  • Abstract View  277

• Comparison of Sound Absorption Coefficient for Natural Fiber

  MUHAMMAD AFHAM ABDUL AZIZ, Kamarul Aini Mohd Sari

  157-163

  • PDF 504
  • Abstract View  691

• A Review of Synthetic Fiber Panel for Acoustic Properties

  mustafa radzi, Mohd Arif Rosli, Kamarul Aini Mohd Sari

  164-173

  • PDF 854
  • Abstract View  1376

• Performance Review of Crumb Rubber as A Modifier in Asphalt Pavement

  INTAN JASMIN ROSLI, ABD SUKOR SARIF

  174-182

  • PDF 562
  • Abstract View  385

• Development of Building Maintenance E-Report System Using Building Information Modeling

  FAZEERUL M.SUOFIAN, MOHD SUFYAN ABDULLAH, JULIANA MOHAMED

  183-195

  • PDF 379
  • Abstract View  391

• Sustainable Concrete Partially Comprised of Supplementary Cementitious Material and Alternative Fine Aggregate- A Review

  Nurul Fazilah Ab Zail, Suraya Hani Adnan

  196-215

  • PDF 290
  • Abstract View  236

• A Systematic Review: Optimization of Extracts Psidium Guajava L. By Using Ultrasound-Assisted with Soxhlet Extraction in Application of Food Preservation

  SITI NURHALIZA ROSLI, MOHAMAD HAIRI OSMAN, MOHD EIZZUDDIN MAHYEDDIN

  216-224

  • PDF 283
  • Abstract View  283

• Comparison of Sound Absorption Coefficient on Natural Fiber and Recycle Materials Panel

  Imran Asyraf Azhar, Kamarul Aini Mohd Sari

  225-233

  • PDF 843
  • Abstract View  886

• Adaptation Of Architectural Design Features Traditional Malay Houses At Kampung Morten For Malacca Contemporary Houses

  NUR IRDINA RAMLI, NURDALILA SAJI

  234-245

  • PDF 1138
  • Abstract View  646

• Design The Stainless Steel Water Hose Pipe by using Flexible Spring

  Yusri Rahman, Dr. Fatimah , Ts. Mohd Syafiq

  246-257

  • PDF 478
  • Abstract View  423

• A Review of Potential on Modified Binder with Glass Cullet as Fine Aggregate Replacement

  AMY EMILYANA ROSLI, ABD SUKOR SARIF

  258-265

  • PDF 294
  • Abstract View  272

• To study the effect of ceramic waste as fine aggregate to the properties of concrete

  KHAIRUL NIZAM JATJO, MOHD SUFYAN ABDULLAH

  267-274

  • PDF 295
  • Abstract View  239

• The Mechanical Properties of Concrete Containing POFA and EPS as Replacement Materials

  Nur Aishah Zafirah Bahari, Mohamad Hairi Osman, Mohd Eizzuddin Bin Mahyeddin

  275-284

  • PDF 416
  • Abstract View  295

• A Study of An Alternative Material for 3D printing in Building Construction

  Nor Yazni Suhana Mat Yaziz, Ts.

  285-291

  • PDF 291
  • Abstract View  285

• A Study of Edible Cutleries by Using Sorghum Flour

  Mohd Hafizalrisman Kabir, Nuramidah Hamidon

  292-300

  • PDF 5007
  • Abstract View  4383

• Sustainable Vermicomposter Design for Household Usage

  Nor Aqilah Mohd Sani, Zarizi Awang

  301-309

  • PDF 407
  • Abstract View  395

• A study on the behaviour of the residents at Felda Soeharto regarding solid waste separation

  Nur Anis Mohamed Alli, Roslinda Ali, Nor Maizzaty Abdullah

  310-318

  • PDF 251
  • Abstract View  206

• A Study of Sugarcane Bagasse and Wood Dust as Acoustic Panel in Building

  Nabil Muhamad Isa, Abdul Zaki Abdul Wahid

  319-327

  • PDF 627
  • Abstract View  598

• Study of The Use of Bamboo as a Construction Material for Accommodation in The Tourism Industry

  Nur farina maisarah binti Md fadzil, Nurdalila Saji

  328-333

  • PDF 618
  • Abstract View  448

• Prediction of Future Streamflow for Kurau River Basin using Artificial Neural Network (ANN)

  Nurshyma Asyikin Salleh, Nur Aini Mohd Arish, Nuramidah Hamidon, Nor Maizzaty Abdullah

  334-340

  • PDF 279
  • Abstract View  193

• Numerical Analysis of Senggarang Embankment Constructed with Cement-CSP Stabilied Silty Clay

  Nur Sakinah, Chee Ming Chan

  341-349

  • PDF 261
  • Abstract View  211

• Comparison of Central Composite and Box-Behnken design in optimization of turbidity removal using nanocellulose filter paper (Neolarmarckia cadamba)

  nurazlin jeffi

  350-360

  • PDF 546
  • Abstract View  864

• A Study on Properties of Concrete as a Potential Innovative of Coarse Aggregate with Coconut Shell

  Anis Faezah Azahar, Noor Khazanah

  361-372

  • PDF 508
  • Abstract View  379

• Numerical Analysis of Senggarang Embankment Constructed with Cement-CSP Stabilised Sandy Clay

  DALILA BAKARI, CHEE MING CHAN

  373-382

  • PDF 346
  • Abstract View  265

• Application of Electrical Resistivity Tomography (ERT) in Designing a Tubewell Dimension, Well Screen and Pumping System of Groundwater in Northern Kelantan

  nurlaila osman, M Faizal Tajul Baharuddin

  383-393

  • PDF 331
  • Abstract View  284

• Trend and Challenges of BIM Training Acceptance in the Construction Industry in Selangor

  NGIIK ZHING WONG, Peniel Ang Soon Ern

  394-408

  • PDF 872
  • Abstract View  507

• Prediction of future temperature using Statistical Downscaling Model (SDSM) in accessing climate change at catchment area Sungai Bekok, Batu Pahat

  Rifni Nuraryssa Mohd Patnani, Nor Maizzaty Abdullah, Nur Aini Arish @ Arshad

  409-417

  • PDF 267
  • Abstract View  249

• Settlement Analysis On The Road Embankment With Different Layer Of Geotextile

  Wan Mohamad Ammar Wan Kamil, Nur Faezah Yahya, Tuan Noor Hasanah Tuan Ismail, Muhamad Faiz Abd Latif

  418-424

  • PDF 700
  • Abstract View  383

• Modelling of Road Embankment on Soft Soil with Geogrid as Soil Reinforcement

  Muhammad Nurul Fairuz Bin Zawil Anuar Zawil, Nur Faezah Yahya

  425-431

  • PDF 765
  • Abstract View  318

• Wind Rose Analysis for UTHM and Possible Pollution Sources Zone

  MOHAMAD AZIZI, Nor Haslina Hashim

  432-443

  • PDF 677
  • Abstract View  571

• Numerical Analysis of Senggarang Embankment Constructed Cement-CSP Stabilised Sandy Gravel

  Nurazmina Hanie Yusri, Chee-Ming Chan

  444-452

  • PDF 308
  • Abstract View  276

• Study Usage of Computational Fluid Dynamics (CFD) For Indoor Simulation

  Nurul Filzati Jamaludin, Fatimah Mohamed Yusop, Nurdalila Saji

  453-463

  • PDF 600
  • Abstract View  552

• A Study on Common Defect of Heritage Mosque in Kedah, Malaysia

  Nur Anis Shahrir, Mohammad Ashraf Abdul Rahman

  464-469

  • PDF 542
  • Abstract View  413

• A Study Comparison of Different Aggregate Between Concrete Mixture with Processed Recycled Waste and Conventional Concrete Mixture With Gravel

  Amirul Asyraf Junaidi, Mohd Eizzuddin Mahyeddin, Mohammad Ashraf Abdul Rahman

  470-475

  • PDF 166
  • Abstract View  177

• Database Access Management and Monitoring System for Solar and Hydropower

  Ag Sauffie Abdullah, MOHD FADLY BIN ABD RAZAK

  476-487

  • Abstract View  188

• Gateway User Interface Design for Distributed Wireless Monitoring Platform using Raspberry Pi (DWMP)

  Muhammad Mirza Amsyar bin Noor Azeb, Faiz Asraf Saparudin, Ahmad Afif Aiman Mohd Redzuan, Nor Shahida Mohd Shah, Muhammad Khairi Azizi Shamsuddin

  488-501

  • PDF 326
  • Abstract View  246

• Wireless Ammonia Sensor System for Distributed Wireless Monitoring Platform using Heltec Wifi LoRa 32 (V2)

  Ahmad Afif Aiman Mohd Redzuan, Faiz Asraf Saparudin, Nor Shahida Mohd Shah, Muhammad Mirza Amsyar Noor Azeb, Muhamad Khairi Azizi Shamsuddin

  502-513

  • PDF 398
  • Abstract View  405

• IoT Monitoring System for Vending Machine

  Nisaa Yasmin bt Nor Izuddin, Huda bin A Majid

  514-521

  • PDF 1212
  • Abstract View  378

• Fertilization of Food Waste Management in UTHM’s Cafeteria Using Arduino

  Muhammad Hafiz Daniel Rusli, Hairulazwan Hashim

  522-533

  • PDF 663
  • Abstract View  609

• Development of Deep Learning Autonomous Car Using Raspberry Pi

  Koon Ling Lee, Hong Yin Lam

  534-548

  • PDF 628
  • Abstract View  505

• Fingerprint Doorlock and Home Security System by Using Arduino and IOT

  Mohamad Farid Mohamad Ramlan, Lilywati Bakar

  549-557

  • PDF 633
  • Abstract View  779

• IoT Based Monitoring Device (Gas Leakage)

  Mohamad Daniel Bin Mohd Selvaraj, PN. MARDZULLIANA

  558-565

  • PDF 405
  • Abstract View  261

• IoT Monitoring System for Aquaculture Farming

  Jia Hui Lim, Huda

  567-577

  • PDF 1185
  • Abstract View  1417

• Handwritten Digit Recognition System using Convolutional Neural Network (CNN)

  KIAT YONG GOH, Aimi Syammi Binti Ab Ghafar

  578-592

  • PDF 684
  • Abstract View  573

• Handwritten Character Recognition Using Convolutional Neural Network

  Shir Ley Chooi, Aimi Syamimi Binti Ab Ghafar

  593-611

  • PDF 1207
  • Abstract View  942

• Solar Power System: Dual-Axis Tracker & Monitoring System for a Gateway Station using Arduino & NodeMCU

  Muhamad Khairi Azizi Shamsuddin, Nor Shahida Mohd Shah, Faiz Asraf Saparudin, Ahmad Afif Aiman Mohd Redzuan, Muhammad Mirza Amsyar Noor Azeb

  612-622

  • PDF 462
  • Abstract View  349

• Power Converter Dual Functions Using Full Bridge Converter Controlled by Microcontroller Arduino

  Muhammad Rohaizat Meptah, Norhanan Kahar

  623-634

  • PDF 326
  • Abstract View  278

• IOT Based Power Monitoring Device (Distribution Box)

  Thivyan Selvaraj, Pn.Mardzulliana

  635-641

  • PDF 620
  • Abstract View  745

• Development of Detection and Prediction System for Induction Motor Faults Using Linear Regression

  Nurul Nadhirah Sani, Faridah Hanim Binti Mohd Noh

  642-652

  • PDF 200
  • Abstract View  233

• Prediction Method for Solar Power using Linear Regression and Fuzzy Logic

  NOOR IZZAH MOHD ABIDEN, NOR AIRA ZAMBRI, Norhafiz Salim, Omar Abu Hassan

  653-666

  • PDF 253
  • Abstract View  212

• Analysis of Vehicle Ride and Handling Performance on Variable Vehicle Load and Speed Using Simulation Method

  Muhamad Hafiz Izzudin Omar, Syabillah Sulaiman, Muhammad Asri Azizul

  667-682

  • PDF 810
  • Abstract View  490

• Alternative Soundproof Material to Reduce Noise HVAC Round Duct System (Rockwool and Bamboo Fiber)

  Muhammad Zariq Ikhwann Mohd Zubir, Wan Mohd Wardi Wan Abdul Rahman

  683-693

  • PDF 903
  • Abstract View  1398

• Superhydrophobicity of Kapok Fiber and It Performance in Oily Water

  MUHAMMAD ADAM BUKHORI HAMIDON, Rosniza Hussin

  694-701

  • PDF 411
  • Abstract View  350

• Characterization of foam materials based on HDPE plastic waste for automotive seat application

  yazid rahman, Noraini Marsi

  702-710

  • PDF 308
  • Abstract View  338

• Design and Development of Bikes-Spoke Guard (BSG)

  Muhammad Hasif Anuar, Rahim Jamian

  711-718

  • PDF 290
  • Abstract View  228

• Automated White Pepper Bottle Filling Machine

  Mohd Asri Rahmarturllah

  719-730

  • PDF 456
  • Abstract View  358

• Design for disassembly in electric rice cooker manufacturing

  Siew Min Cheng, Tengku Nur Azila Raja Mamat

  731-742

  • PDF 755
  • Abstract View  675

• Design of a Low Cost Coin Acceptor for Vending Machine

  Richmond Chris Chee Leong Ho, Muhammad Zulkipli, Muhammad Farid Shaari

  743-752

  • PDF 1629
  • Abstract View  1385

• A Review Study on the Effect of Needle Punching Machine Parameters on the Filtration Efficiency of Non-woven Fabric used for Development of Face Mask

  Poh Jing Tay, Siti Hana Nasir

  769-778

  • PDF 489
  • Abstract View  435

• Study of Potential of Polyethylene Foam as Sound Insulation for HVAC Rectangular Duct

  Muhammad Syahir Sulaiman, WAN MOHD WARDI WAN ABDUL RAHMAN

  779-786

  • PDF 1199
  • Abstract View  392

• Encouraging Classroom Learning through Game-Based Learning (GBL) Approach

  Nur Hanis Othman Ali, RAHIM JAMIAN, MOHD FUAD YASAK

  787-798

  • PDF 454
  • Abstract View  465

• Evaluation of High Density Polyethylene Plastic Bag Performance towards Edge and Point Stresses Using Taguchi Method

  Ng Si Jin, Yong Tze Mi

  799-812

  • PDF 424
  • Abstract View  623

• Analysis of The Performance on Wheel Rim Towards Impact Test Wheel Rim Impact

  Nurlaily Fatin Jabidi, Rahmah Mahmudin

  842-854

  • PDF 583
  • Abstract View  305

• Experimental Study of Level and Flow Control

  Ayu Najieha Abdul Aziz, Rohani Rahmad

  813-822

  • PDF 1598
  • Abstract View  819

• The Study of Superhydrobobicity of Kapok Fiber and Its Performance

  Nur Akmal Adib Zol, Rosniza Hussin

  823-830

  • PDF 426
  • Abstract View  378

• The Study of Characteristic of Eco-Friendly Geotextile based on Low-Density Polyethylene (LDPE) Plastic Bag Waste

  ERRA SAFFIRRA SAHREL, Noraini Marsi

  831-841

  • PDF 486
  • Abstract View  380

• Design and Development of Mini Model for Mini Tempeh Packaging System: Wrapper Feeder and Soybean Feeder

  Muhammad Ainul Azam Zakaria, Dalila Mohd Harun

  855-862

  • PDF 267
  • Abstract View  240

• User-Driven Prosthetic Robotic Arm for Patients with Lower Arm Amputation

  Qazeem Hussin, Amirul Syafiq Sadun

  753-768

  • PDF 639
  • Abstract View  384

• Design and Simulation of Idling Start-Stop System on Motorcycles

  Harith Hamidoon, Syabillah Sulaiman

  863-868

  • PDF 279
  • Abstract View  264

• Design of Gating System for Green Sand Casting of Alumium Alloy

  Muhammad Hishamuddin Mohamed Hashim, Aslinda Saleh

  869-881

  • PDF 567
  • Abstract View  519

• CFD Simulation to Enhance the Efficiency of Air Compressor

  Nur Arif Aiman Bin Akhir, TS. MOHD FAIZAL BIN ESA

  882-891

  • PDF 475
  • Abstract View  245

• Design and Development of Pet Carrier Travel Box

  Mohamad Luqmanul Hamri Abd.Malek, Shaiful Rizal Masrol

  892-903

  • PDF 671
  • Abstract View  628

• A Review on Mechanical and Comfort Properties of Medical Bandages from Different Material and Finishing

  Nur Athirah Nabilah Asmiza, Siti Hana Nasir

  904-911

  • PDF 536
  • Abstract View  603

• Design and Fabrication of Noise Silencer for Grass Trimmer

  Azmir Rajali, RAHIM JAMIAN

  912-923

  • PDF 488
  • Abstract View  474

• Compression of Bamboo Culm Subjected to Different Treatment Duration

  Mohamad Amirul Fahmin Mat Noh, Mohd Nazrul Roslan

  924-929

  • PDF 232
  • Abstract View  205

• Review Study on the Effect of Knotted and Knotless Knot based on Strength Properties of the Fishing Nets

  Jan Eldear Januar, Siti Zaharah binti Kunchi Mon

  937-944

  • PDF 368
  • Abstract View  328

• A Review on Impact of Environmental Conditions on Fishing Net Mechanical Properties

  Nur Aini Binti Halim, Siti Zaharah Kunchi Mon

  957-964

  • PDF 1263
  • Abstract View  1018

• Portable Local Exhaust Ventilation Unit for Welding Fumes

  Nur Nabilah Rosli, Mohd Fuad Yasak

  972-978

  • PDF 629
  • Abstract View  666

• Improved Performance of Thin Film Nanocomposite (TFN) Nanofiltration Membrane-by the Addition of Functionalized Graphene Oxide for Desalination Application

  Nabilah Husna Hasbullah, Nurasyikin Misdan

  979-987

  • PDF 353
  • Abstract View  191

• Analysis of Sandwich Core Fiber Composite Subjected to Different Skin Reinforcement Materials

  Muhammad Burhanuddin bin Mohd Mazlan Burhan, Mohd Nazrul Roslan

  988-994

  • PDF 169
  • Abstract View  167

• Cost Reduction of Electric Oven Machine Using Design for Manufacture and Assembly (DFMA)

  Mahathir Mahazis, Azli Nawawi

  995-1005

  • PDF 399
  • Abstract View  321

• Modelling of A User-Driven Prosthetic Robotic Arm for Patients with Forearm Amputation

  Hazim Hanifah, Amirul Syafiq Sadun

  1006-1017

  • PDF 159
  • Abstract View  210

• Static Structural Analysis of Different Spoke Thickness on Vehicle Wheel Rim

  Muhaimin Muhammad, RAHMAH MAHMUDIN

  945-956

  • PDF 737
  • Abstract View  418

• Design and Development of Satay Delivery Packaging Box

  Nur Nadiah Marwee, Shaiful Rizal Masrol

  1018-1029

  • PDF 631
  • Abstract View  578

• Review on The Paper Making Process From Bamboo As A Paper Product

  MUHAMMAD AKIF SHAMSURI; Nor Mazlana Main

  965-971

  • PDF 3065
  • Abstract View  5096

• A Review on the Strength of Fishing Net; The Effect of Material, Yarn Diameter and Mesh Size

  NUR FARAH HANIS SHARIF, SITI ZAHARAH KUNCHI MON

  1030-1036

  • PDF 1586
  • Abstract View  776

• Development of Vending Machine Operation System Using Programmable Logic Controller (PLC)

  muhamad husni bin samsuni samsuni, Muhammad Farid Shaari

  930-936

  • PDF 949
  • Abstract View  642