Vol. 5 No. 1 (2024): RPMME

Articles

• Evaluation of Stability between Conventional Femoral Stem and Short Stem in Total Hip Arthroplasty

  Muhammad Syahrul Ashraff Said, Haslina Abdullah

  1-7

  • PDF 188
  • Abstract View  125

• Design and development PolyLactic Acid (PLA) recycling machine for 3D printer

  Sia Chee Kiong, Amali Firdaus Saini

  8-11

  • PDF 387
  • Abstract View  197

• Impact Behaviour of Existing Bicycle Helmet Subjected to Drop Test

  Mohamad Irfan Farhan Mohd Nawi, Mohd Norihan Ibrahim @ Tamrin

  12-23

  • PDF 262
  • Abstract View  154

• Investigation of pump and motor healthiness based on vibration analysis at uthm biodiesel plant

  Rafie Bahrin, Norrizal Mustaffa

  24-34

  • PDF 309
  • Abstract View  169

• Simulation Study of Flange Characteristic at Various Operating Condition

  Amirul Iezlan Ismail, Norrizal Mustaffa

  35-48

  • PDF 334
  • Abstract View  155

• Humerus Compression Plate Analysis Using ANSYS Software

  Khairun Nisa Mahfuzah Haidir, Al Emran Ismail

  49-57

  • PDF 185
  • Abstract View  162

• Prediction of Tool Wear by Machine Learning Method in Turning Process

  Nor Aziera Azman, Lee Woon Kiow

  58-69

  • PDF 384
  • Abstract View  184

• The Development of Pineapple Leave Fibre Composite Material for Marine Application Using Hand Lay-Up Method

  Muhammad Iqmal Aizat Majibul Rahman, Ahmad Hamdan Ariffin

  70-78

  • PDF 471
  • Abstract View  268

• Modal Analysis of a Cantilever Beam with Various Material Using ANSYS

  Danavicknesvaran M Sekhar, Zaleha Mohamad

  79-86

  • PDF 427
  • Abstract View  308

• Study of Carbon Fiber Layout Orientation Effect on Joining with Aluminium

  Muhammad Hidayat Azman, Mohd Nizam Katimon

  87-91

  • PDF 163
  • Abstract View  163

• Thermodynamic Stability of Polysulfone/Zinc Salt Membrane

  Aliff Ikram Nor Azmi Tarmizee, Muhamad Zaini Yunos

  92-99

  • PDF 141
  • Abstract View  120

• Improvising the Design of Optical Geometric Experiment Apparatus for Pre-University Physic Course

  Adzra Ibrahim Abdul Yatim, Salleh Ahmad Bareduan, Mohd Sharin Abdul Karim, Choo Ley In, Abdul Ghani Mohamad Dewa

  100-109

  • PDF 255
  • Abstract View  346

• The Effect of Binder on Bioceramic Surface Roughness when Milling using Ball Nose End Mill

  Amin Suffian Suleiman, Noor Hakim Rafai

  110-117

  • PDF 147
  • Abstract View  122

• Design a Portable Lifting Machine for Transfer Heavy Bricks in Construction Sites

  Nurul Nazihah Jamil, Mohd Azwir Azlan

  118-129

  • PDF 527
  • Abstract View  689

• Acoustic Performance of Upcycled Materials: Plastics & Cigarette Buds in Laminate Composites

  Ganahcan Nair R Sivakumar, Muhd Hafeez Zainulabidin

  130-139

  • PDF 210
  • Abstract View  187

• Performance Evaluation of 3D Equipment Model for Laboratory Fume Hoods

  Muhammad Syazwan Mustafah, Muhamad Zaini Yunos

  140-148

  • PDF 162
  • Abstract View  187

• Determination of Rice Husk Silica Effect on SOFC SDC'S Electrolyte Through Material Properties Characterization

  Haziq Irham Azam, Mohd Azham Azmi

  149-155

  • PDF 200
  • Abstract View  152

• Numerical Simulation of Corrugated Core Sandwich Construction for Biomedical Applications

  Kreeshanthini Gobalan, S Kanna Subramaniyan

  156-168

  • PDF 127
  • Abstract View  121

• Comparative Analysis of Coil and Jacketed Heating Vessels: A Study on Thermal Efficiency and Economic Viability

  Alif Aiman Mohamad Alim, Norrizal Mustaffa

  169-179

  • PDF 980
  • Abstract View  335

• Crash and Impact Analysis of Light Vehicle Against Traffic Light Pole

  Puvanithan Raguraman, Mohd Norihan Ibrahim

  180-191

  • PDF 419
  • Abstract View  230

• Development of Economic Analysis Program Via Matlab’s App Designer

  Muhammad Nur Izzat Zaini, Rosli Asmawi, Zamri Noranai

  192-199

  • PDF 225
  • Abstract View  151

• Line Balancing Study and Analysis at a Tractor Assembly Line

  Shakilla Nur Asimah Mat Hussin, Salleh Ahmad Bareduan

  200-208

  • PDF 434
  • Abstract View  285

• Effect of Bed Temperature and Extruded Height on 3D Printed PLA Mechanical Properties

  Muhamad Faris Mohd Hisam, Mohd Azham Azmi

  209-206

  • PDF 419
  • Abstract View  337

• Fabrication and Physiochemical Properties of Alginate and Natural Aloe Vera Biofilm for Wound Healing Applications

  Simresan Baskaran, Maizlinda Izwana Idris

  217-222

  • PDF 181
  • Abstract View  148

• Effect of Carbon Reinforcement on the Properties of Seashell Ceramic Composite

  Mohamed Nasrul Mohamed Hatta, Yeh Jia Ren, Kamarul Azhar Kamaruddin

  223-230

  • PDF 184
  • Abstract View  119

• Fabrication of Rice Husk Through Compaction Techniques for Water Filter Application

  Jemima Fae James, Sufizar Ahmad, Nurul Ain Shuhada Othman , Siti Sarah Sofia Mustpha@Mustapha

  231-237

  • PDF 197
  • Abstract View  274

• Rice Husk Silica Ceramic Water Filter System

  Siti Sarah Sofia Mustpha @ Mustapha, Sufizar Ahmad, Jemima Fae James, Nurul Ain Shuhada Othman

  238-243

  • PDF 262
  • Abstract View  347

• Characterization of Rice Husk Silica Foam Fabricated by Slurry Method for Water Filter Application

  Nurul Ain Shuhada Othman, Sufizar Ahmad

  244-249

  • PDF 227
  • Abstract View  277

• Effects of Various Calcination Times and Temperatures on Zinc Oxide as Gas Sensing For Volatile Organic Compound

  Suraini Abdullah, Ainun Rahmahwati Ainuddin @ Nordin

  250-258

  • PDF 177
  • Abstract View  166

• Fabrication and Physiochemical Properties of Alginate and Honey Biofilm for Wound Healing Applications

  Fatin Amirah Yusop, Mohamad Hasshim Mohd. Sabirin, Maizlinda Izwana Idris

  259-268

  • PDF 203
  • Abstract View  215

• Investigating on Effect of Salt as a Moisture Absorbent on the Performance of Moisture Energy Generator

  Md Arif Hossain, Muhamad Zaini Yunos

  269-275

  • PDF 157
  • Abstract View  288

• A Case Study for Potential Process Improvements in the Briquette Industry

  Ahmad Hazly Ahmad Zainuddin, Mohd Yussni Hashim

  276-282

  • PDF 203
  • Abstract View  309

• Effect of Square Head Tooltip and Joining Speed on Aluminium Alloy AA6061 in Friction Stir Welding

  Denilson Owen Anak Bujang, Rosli Ahmad

  283-288

  • PDF 140
  • Abstract View  135

• The Optimum Powder Loading of Different Binder Ratio Between HDPE and RWL as Binder in Metal Injection Molding

  Muhamad Faiz Zamri Zamri, Azriszul Mohd Amin

  289-296

  • PDF 144
  • Abstract View  142

• The Optimum Powder Loading of Different Binder Ratio Between LDPE and RWL as Binder in Metal Injection Molding

  Muhammad Aminin Umair Badrul Hisham, Azriszul Mohd Amin

  297-303

  • PDF 218
  • Abstract View  170

• Friction Stir Welding of Dissimilar Aluminium Alloys for Marine Applications.

  Nor Asyikin Mohd Yusof, Shazarel Shamsudin

  304-317

  • PDF 209
  • Abstract View  481

• A Numerical and Experimental Investigation for Deposition of Conductive Ink on Multiple Substrate with Different Surface Energy and Ink Surface Tension

  Mohamad Hannan Asyraf Hasnul Fauzi, Muhammad Najmi Zainal, Rd Khairilhijra Khirotdin, Wan Muhamad Syakir Wan Zaini

  319-326

  • PDF 188
  • Abstract View  146

• Study of the Effect of 6S Implementation on Hazard in the FKMP UTHM Workshop

  Anastasia Meg Lim Yin, Rosli Asmawi

  327-332

  • PDF 158
  • Abstract View  143

• Experimental Study on Water Filtration System by Using Clay-Kenaf-Biochar for Agriculture Uses

  Ku Muhammad Iskandar Ku Mahmood, Zazuli Mohid, Kamaruddin Kamdani

  333-344

  • PDF 416
  • Abstract View  312

• Optimizing Parameters of End Mill Cutting Tools for Milling Process

  Muhammad Azamuddin Amran, Azriszul Mohd Amin

  345-357

  • PDF 195
  • Abstract View  213

• Setting Parameters of Control Chart Pattern Classifier for Effective Patterns Recognition

  Muhammad Ammar Abdul Halim, Ibrahim Masood

  358-365

  • PDF 270
  • Abstract View  114

• Effect of Alkaline Treatment on the Tensile Strength and Hardness of Pineapple Fiber Reinforced Epoxy Resin

  Navinn Vijiyakumar, Mohd Yussni Hashim

  366-370

  • PDF 147
  • Abstract View  121

• Simulation on Hip Implant Using Finite Element Method

  Amar Reezlan Amar Jauhari, Haslina Abdullah

  371-377

  • PDF 204
  • Abstract View  199

• Producing a Liquid Soap by Adding Lemon Extract from Used Cooking Oil for Multipurpose Cleaning Use

  Nurul Atiqah Aisyah M. Kamal, Siti Aida Ibrahim

  378-386

  • PDF 1175
  • Abstract View  1411

• Investigation of Entropy Generation in Cooling Tower System

  Muhammad Syafiq Anwar Rizman, Mohamad Farid Sies

  387-392

  • PDF 184
  • Abstract View  168

• Enhance the Efficiency of the Regenerative Braking System in Electric Vehicles using a Hybrid Energy Storage System

  Muhammad Naseem Azlan Zulkarnian Gafoor, Taha Mohamed Ahmed Sadeq

  393-409

  • PDF 322
  • Abstract View  176

• Characterization of Raw Kapok Fiber as Filtration Medium for  Biodiesel Plant Waste Oil

  Muhammad Syakir Sanusi, Ashari Kasmin, Rosniza Hussin

  410-418

  • PDF 335
  • Abstract View  256

• Effect of Reaction Time and Temperature on Biodiesel Production from Vegetable Oil

  Asyiq Hazarith Abu Bakar, Nor Mazlana Main, Nurul Fitriah Nasir

  419-427

  • PDF 163
  • Abstract View  288

• The Effect of Water Ratio Variation in Soap From Cooking Oil

  Ahmad Sahli Abdol Latif, Siti Aida Ibrahim

  428-434

  • PDF 319
  • Abstract View  163

• Effect of Varied Degumming Concentrations on Soap from Used Cooking Oil

  Ahmad Hafiz Ahmad Fizar, Siti Aida Ibrahim

  435-443

  • PDF 331
  • Abstract View  278

• Efficiency Analysis of Full Rotation Counter Flow of Shell and Tube Heat Exchanger using CFD Tool

  Muhammad Na'im Ramli, Norrizal Mustaffa

  444-451

  • PDF 143
  • Abstract View  116

• The Use of Coconut Fiber as an Enhancer to the Bentonite Water-Based Drilling Fluid

  Mohammad Zahin Azhari Zairil Aznin, Nurasyikin Misdan

  452-459

  • PDF 162
  • Abstract View  185

• Analysis of Heat Transfer in Shell and Tube Heat Exchanger (STHE) using Counter and Parallel Flow

  Muhammad Danial Aiman Zaidi Mohd Yazid, Nor Mazlana Main

  460-468

  • PDF 523
  • Abstract View  528

• Exploring the Factors Influencing Road Accidents in Parit Raja: An In-Depth Research Investigation

  Jacqualine Cheah Rigi Gilie, Shafawi Ismail

  469-477

  • PDF 374
  • Abstract View  276

• Analysis of Vibration in Pipe: Effect from Different Pipe Sizes and Pressure Inlet

  Matilda Stacia Willy, Zuliazura Mohd Salleh

  478-491

  • PDF 130
  • Abstract View  133

• Failure Mode and Effect Analysis of Buttterfly in UTHM Biodiesel Plant Failure Mode and Effect Analysis

  Amirul Iskandar Borhanoddin, Wan Mohd Wardi Wan Abdul Rahman

  492-496

  • PDF 294
  • Abstract View  161

• Analysis of Difference Variable Parameter Effect to Temperature Drop: Application of Cooling Tower

  Lizzybel Pawun Uwe, Zuliazura Mohd Salleh

  497-508

  • PDF 172
  • Abstract View  132

• Flat Cap Atomizer Performance in Filtering Welding Fume

  Muhammad Faiz Azfar Abu Hassan, Mohamad Farid Sies, Ahmad Fakruaiman Anuar

  508-517

  • PDF 136
  • Abstract View  110

• The Effect of Space Holder Types and Composition on the Properties of Zirconia Foam

  Muhammad Hadi Asmurad, Fazimah Mat Noor, Azzura Ismail

  518-524

  • PDF 149
  • Abstract View  90

• Development of Metal Foam Characteristics Based on Simulation Method

  Teo Wee Xuan, Zaleha Mohamad

  525-531

  • PDF 180
  • Abstract View  101

• Tensile and Flexural Properties of Aramid Fiber Composite Laminates

  Muhammad Asyraaf Halim, S Kanna A/L Subramaniyan

  532-537

  • PDF 259
  • Abstract View  219

• Design and Evaluation of Coronary Artery Stent Geometry Based on Finite Element Analysis

  Muhammad Suhairi As'ari, Al Emran Ismail

  538-544

  • PDF 240
  • Abstract View  301

• Solar Powered Robot with Solar Tracker

  Abdul Muhaimin Che Rozi, Noormaziah Jafferi

  545-552

  • PDF 415
  • Abstract View  249

• Modal Analysis of Cantilever Beam with Various Crack Surfaces

  Danavicknesvaran M Sekhar, Zaleha Mohamad

  553-560

  • PDF 151
  • Abstract View  159

• A Simple Self-Balancing Robot For Educational Purposes

  Noorshaheefa Ahmad Nizam, Normaziah Jafferi

  561-565

  • PDF 164
  • Abstract View  141

• Analysis of Different Cracked on Cantilever Beam Using Ansys Software

  Mahalechumi Sivaraman, Zaleha Mohamad

  566-574

  • PDF 189
  • Abstract View  137

• Numerical Analysis of Projectile Impact Towards Flax Plate with Different Orientation

  Pavin Pillai Sathasivam Pillai, Mohd Norihan Ibrahim @ Tamrin

  575-581

  • PDF 128
  • Abstract View  108

• Failure Analysis of Bolted Connection Subjected to Torsional Loadings

  Susharrman Sai, S Kanna Subramaniyan

  582-593

  • PDF 476
  • Abstract View  145

• Condition Monitoring of Aircraft Composite Structure using Infrared Thermography

  Muhammad Haziq Mohd Razal, Maznan Ismon

  594-601

  • PDF 208
  • Abstract View  159

• Fabrication of Alumina-Zirconia Foam Using Foam Replication Method

  Muhammad Akif Azi Rahimee, Fazimah Mat Noor

  602-609

  • PDF 153
  • Abstract View  147

• To Design a Fire Ball Extinguisher Launcher Attachment to Drone

  Wan Muhammad 'Izzat Ruzain Mohamad Rudi, Abd Khalil Abd Rahim

  640-617

  • PDF 571
  • Abstract View  189

• Design and Analysis of a Natural Gas-Fueled Flameless Hot Air Generator

  Valarie Kaksing Baraok, Shahrin Hisham Amirnordin, Adam Kasani, Amir Khalid, Mohd Faizal Mohideen Batcha, Mzahar Abd Jalal, Makatar Wae-hayee, Khairul Effendy Ahmad Zainudin

  618-625

  • PDF 162
  • Abstract View  132

• Adaptation Time Model Based on Difference in Genders

  Muhammad Zahirulhaq Ahmad, Encik Ahmad Fu'ad Idris

  626-635

  • PDF 131
  • Abstract View  123

• Effect of Thermal and Hydrodynamic Corrosion-Erosion of Solid Particles in Shell and Tube Heat Exchanger

  Nur Dayana Irdina Depikalasben, Normayati Nordin

  636-640

  • PDF 157
  • Abstract View  104

• Design of Cockle’s Meat Separator Machine Using Cost Based Design Method

  Muhamad Afiq Hassan Nusi, Nik Hisyamudin Muhd Nor

  641-650

  • PDF 129
  • Abstract View  93

• Design of Cockles Cleaning and Grading Machine Using Cost Based Method

  Muhammad Alim Zakaria, Nik Hisyamudin Muhd Nor

  651-661

  • PDF 187
  • Abstract View  160

• Aerodynamic Comparison on Different Types of Two-Seater Car Using Ansys CFX

  Nurul Izzati Zulkarnain, Mohammad Kamil Abdullah

  662-671

  • PDF 253
  • Abstract View  184

• Casing Prototype Design for Portable Electromagnetic Radiation Detector using 3D Printing Technology

  Muhammad Akmal Hanif Azman, Mohd Fahrul Hassan, Syarfa Zahirah Sapuan, See Khee Yee

  672-679

  • PDF 199
  • Abstract View  179

• Application of Response Surface Method (RSM) to Optimize 3D Printer Process Parameter by using Polylactic Acid (PLA) Material

  Koh Kai Li, Sia Chee Kiong

  680-691

  • PDF 337
  • Abstract View  151