Vol. 3 No. 1 (2022): RPMME

Articles

• Investigation of Impact Properties of Composite from Seashell & Carbon Fiber Using Simulation

  DILWWYN ANAND DEVADASON, MOHAMED NASRUL MOHAMED HATTA

  1–9

  • PDF 410
  • Abstract View  282

• A study in Development of Control Chart Pattern Recognition Scheme Based on Literature

  Muhammad Afiq Baharuddin, Ibrahim Masood

  10-25

  • PDF 354
  • Abstract View  295

• Design of Banana Slicing Machine

  Mohd Afiq Danial Bin Khairull Azhar, Abd Khalil Bin Abd Rahim, Mahmod Abd Hakim Bin Mohamad

  26-36

  • PDF 2207
  • Abstract View  849

• Thermal Debinding Study of Waste Polystyrene as a Sustainable Binder in Metal Injection Molding

  Nurul Sabrina Noorzaidy, Rosli Asmawi

  37-44

  • PDF 304
  • Abstract View  286

• Extraction and characterization of hydroxyapatite (HA) from eggshell by precipitation method for bone implant coating: A Case Study

  Ahmad Nazmi Amiruddin, Fazimah Mat Noor

  56-67

  • PDF 427
  • Abstract View  390

• Arena Simulation Training Guideline for Assembly Line

  Norsahira Maslazim, Sh Salleh Sh Ahmad

  68-73

  • PDF 597
  • Abstract View  679

• The Influence of Detergents on the Physical and Mechanical Properties of Clothing Fabrics

  Muhammad 'Izzat Zainul Abidin, Nur Azam Badarulzaman

  74-86

  • PDF 1131
  • Abstract View  1052

• Initial Sequence Strategy for Constructive Heuristics Using Gantt Chart

  Hattem Siraj, Salleh Ahmad Bareduan

  87-96

  • PDF 435
  • Abstract View  621

• Review Of The Effect Of Yttrium And Neodymium On Microstructure And Mechanical Properties Of Magnesium Alloy

  NOOR ARWANI SYAFIRA MOHD AZHAR, ROSLI AHMAD

  459-464

  • PDF 239
  • Abstract View  274

• Initial and Final Setting Time Determination of 3D Printing Mortar with Kenaf Powder Addition

  Amira Ismail, Mustaffa Ibrahim

  1075-1081

  • PDF 556
  • Abstract View  355

• Review on Biosynthesis of Tio2-Sio2 Nanocomposites Towards Photocatalytic Purpose of Wastewater Treatment TIO2-SIO2 NANOCOMPOSITES

  Muhammad Zul Idzham Abdul Ghani, Nik Hisyamudin Muhd Nor

  97-107

  • PDF 506
  • Abstract View  385

• Design and Development of a Semi-automated Machine in Producing Multi-Biscuit for Small Industries Semi-Automated Multi-biscuit machine

  Zulhanif Zulkafle, Mohd Sallehuddin Yusof

  193-202

  • PDF 739
  • Abstract View  454

• Study on Mechanical and Thermal Behaviour of Rotor Brake Using Computer Aided Engineering Software

  Sarah Yusof, Noormaziah Jafferi

  749-759

  • PDF 490
  • Abstract View  271

• The Study of Surface Defects of Carbon Fibre Reinforced Polymer (CFRP) using Minimum Quantity Lubricant (MQL) in the Milling Process

  Chang Chong Cheah, Erween bin Abd Rahim

  236-250

  • PDF 400
  • Abstract View  358

• Finite Element Analysis on Wrapping Structure of Piping System

  Yukeswaran Selva Thurai, Ahmad Mubarak Tajul Arifin

  150-159

  • PDF 516
  • Abstract View  307

• Augmented Reality-Based Design of Shoes for Arthritis

  Nabil Fikri Hashim, Koh Ching Theng

  486-492

  • PDF 393
  • Abstract View  303

• The Dynamic response of AL 2024-T3 aluminium plates impacted by projectile using small and medium scale of cluster parallel computing

  Adip Kamel Abdul Ghani, Mohd Norihan Ibrahim @ Tamrin

  1020-1024

  • PDF 251
  • Abstract View  329

• Flow Induced Vibration of Simply Supported Cantilever Beam based on One-way Fluid Structure Interaction

  Nazren Al Nazirul Mohamad Faizal, Izzuddin Zaman

  298-305

  • PDF 403
  • Abstract View  387

• Design a mould insert for a complex design

  Mugilvarnan Saminathan Saminathan Govindasamy, Halim Irwan Ibrahim

  539-549

  • PDF 274
  • Abstract View  299

• A Machine for Bubble Wrapping Glass Perfume Bottle

  Fadhilah Nurhanisah Fazail, Ibrahim Masood

  998-1008

  • PDF 315
  • Abstract View  380

• Development of Batik Pen Canting Tool using CNC Machine

  Muhammad Ezzad Firdaus Roslan, Zazuli Mohid

  812-823

  • PDF 537
  • Abstract View  421

• Extraction of Gelatin from Salmon Bone

  Fatin Najihah Mohd Tamiri, Prof. Madya Dr. Hasan Zuhudi Abdullah

  351-356

  • PDF 858
  • Abstract View  401

• Design of Ladder Climbing Assisting Device with Simple Mechanism and Safety Equipment

  Chang Fei Nging, Nik Hisyamudin Muhd Nor

  587-598

  • PDF 421
  • Abstract View  297

• Vibration Characteristic of Difference Rail Crack Via 3-D Numerical Method

  Nazahah Nuha Abdul Rahman, Shahmir Hayyan Sanusi, Lee Woon Kiow

  855-861

  • PDF 234
  • Abstract View  268

• Effect of Tensile Strength on Treated Bamboo Fiber with Alkali Treatment Compared to Untreated Bamboo Fiber

  NORHAMIZI ARIEF ABDULLAH, MOHD YUSSNI HASHIM

  393-402

  • PDF 454
  • Abstract View  360

• Analysis Of Forming Limit Diagrams In Aluminum Sheet Alloy by Universal Tensile Testing

  MUHAMMAD LOKMAN ADRI, DR Ng Chuan Huat

  632-637

  • PDF 208
  • Abstract View  219

• Conceptual design of reverse vending machine (RVM): Finite Element Analysis

  Al Emran Ismail, Aiman Hasan

  905-914

  • PDF 1443
  • Abstract View  807

• Internet-of-Things Based Turning Machine Tool Temperature Monitoring System

  Li Shen Andy Liew, Prof. Dr. Yusri bin Yusof

  124-137

  • PDF 350
  • Abstract View  297

• Finite Element Analysis of Pipeline Upheaval Buckling with different Initial Imperfections

  Muhammad Nashriq Mazuki, Al Emran Ismail

  444-450

  • PDF 562
  • Abstract View  278

• A Study in Buildability Aspect Caused by Different Shape and Geometry of a Nozzle in Printing of Abrasive Materials

  Muhammad Syamir Abu Bakar, Nasuha Sa’ude, Mustaffa Hj Ibrahim, Nur Amira Natasha Ismail

  1055-1064

  • PDF 313
  • Abstract View  278

• A Review on Aluminum Alloy Recycling Technique

  Lioyd Leond Liaw, Ts. Dr. Nur Kamilah Binti Yusuf

  175-183

  • PDF 746
  • Abstract View  542

• Producing Stainless Steel (SS16L) with Hydroxyapatite (HA) via Slurry Method

  R . Yarshine Rani, sufizar Ahmad, F . Mat Noor

  1097-1103

  • PDF 344
  • Abstract View  281

• Flexural and Tensile Properties of Different Aluminum Alloy through Simulation Analysis

  Farah Nur Arissa Muhammad Nizam, Dr. Sharifah Adzila Syed Abu Bakar

  217-229

  • PDF 842
  • Abstract View  406

• Simulation Study and Analysis of Different Polymer Material In Injection Mould Process of Plastic Gear By Using Moldflow Adviser Software and Taguchi Method

  Ahmad Zahiruddin Mohammad, Noor Hakim Rafai

  465-475

  • PDF 533
  • Abstract View  455

• Performance Evaluation of Different Types of Additive Manufacturing Electrodes Fabricated by Fused Deposition Modelling (FDM) on Machining Mild Steel

  Nicolas Ng, Reazul

  779-788

  • PDF 370
  • Abstract View  335

• Optimisation of Surface Roughness in The Cnc Milling Process

  MUHAMMAD SYAZWAN HASSAN, AZRISZUL MOHD AMIN

  267-277

  • PDF 1010
  • Abstract View  445

• The Study of Surface Defects of Carbon Fibre Reinforced Polymer (CFRP) under Minimum Quantity Lubricant (MQL) in the Milling Process: A Literature Review

  Chang Chong Cheah

  236-250

  • PDF 244
  • Abstract View  251

• Performance Enhancement toward Developed Computer Vision Measurement Application for End Mill Cutting Tool

  Bin Hong Chong, Rasidi Ibrahim

  1025-1031

  • PDF 207
  • Abstract View  244

• [RETRACTED] Effect of reaction temperature and inlet velocity of a bubble column reactor on the bubble size for biodiesel production

  Muhammad Nur Amirulhaq Mohd Yusof, Nurul Fitriah Nasir

  566-575

  • PDF 148
  • Abstract View  235

• Development Prototype of Smart Mailbox That Send Email to User When Parcel Barcode Being Scanned

  Mohamed Fakhruzzaman Mohamed Firdaus, Kamarul-azhar Kamarudin

  839-847

  • PDF 682
  • Abstract View  461

• A Review on Wear Behavior of Nickel-Silicon Carbide Electrodeposition Coating

  Izzah Aqilah Ariffin, Zakiah Kamdi

  377-384

  • PDF 524
  • Abstract View  296

• Bibliography on PCM Thermal Energy Storage Solar Water Heating Systems

  Marsya Alia Zulkiflee

  614-622

  • PDF 222
  • Abstract View  216

• Visual Inspection of Casting Product Using Convolutional Neural Network (CNN)

  Mohamed Syahrir Azhar, Low Cheng Yee

  884-892

  • PDF 410
  • Abstract View  334

• Bio-Synthesized Zinc Oxide Nanoparticles Using Plant Extracts

  Ahmad Zulfaqar Mohammad, Ainun Rahmahwati Ainuddin@Nordin

  424-434

  • PDF 587
  • Abstract View  209

• 3D Design Modelling of A Quadcopter and The Quadcopter Mechanic using SOLIDWORK and Simulink

  Mumamad Zulhilmi Multaza, Noormaziah Jafferi

  660-670

  • PDF 265
  • Abstract View  337

• Simulation Study of Elliptical Thin-Walled Structure Crash Box with Holed Initiator Through Axial Impact

  Jeffey Jep Brown, Al Emran Ismail, Dave Kidau Anak Wilie Chiak Mong

  1041-1048

  • PDF 323
  • Abstract View  216

• Development of Shredding Machine for Plastic Recycling

  Muhammad Syahmi Suliman, Muhammad Akmal Johar

  160-169

  • PDF 1472
  • Abstract View  846

• Study on the effect of different build orientations to the Rapid Prototyping Systems

  Shu Qi Ho, Mohd Halim Irwan Ibrahim

  715-723

  • PDF 217
  • Abstract View  169

• Identification of Trend and Shift Variation in Bivariate Process Using Pattern Recognition Scheme

  N. Abdul Rahman, Mustaffa Ibrahim

  1082-1090

  • PDF 177
  • Abstract View  210

• THE Investigation of Proximate Analysis of Coal and Coconut Shell – A Review

  Sharvin Ramesh, Norasikin Mat Isa

  203-208

  • PDF 327
  • Abstract View  314

• Cold Water System Design In Low-Rise Office Building Using Revit

  hidayati yasni, Sri Yulis M Amin

  760-765

  • PDF 889
  • Abstract View  282

• Effect of CT Specimen Geometry to Fracture Properties of Aluminium Alloy Using Simulation Analysis

  NORASMA SALSABILA ZAWAWI, NORADILA ABDUL LATIF

  251-260

  • PDF 264
  • Abstract View  218

• Mechanical Design and Simulation of Oceanic Wave Energy Converter

  Mohd Hafiz Helmi Mohd Jaffar, Hj. Mohd Azwir Azlan

  493-501

  • PDF 354
  • Abstract View  204

• Abrasion Effects Between Cockle Shell Waste Particles and Perlite Particles in Teeth Cleaning

  SIN LING NGO, SHAHMIR HAYYAN SANUSI

  306-319

  • PDF 359
  • Abstract View  378

• Design of A Small Scale of Oceanic Wave Energy Converter At Terengganu Coast

  Mohd Hafiz Helmi Mohd Jaffar, Hj. Mohd Azwir Azlan

  550-558

  • PDF 600
  • Abstract View  327

• Design and Simulation of Cultivating Machine for Double Digging Planting Technique

  Mohamad Aqmal Fikry Zazali, Muhammad Akmal Johar

  824-830

  • PDF 355
  • Abstract View  295

• Development Of A Product Remanufacturing Assessment Tool Based On Part Attributes And Features

  Muhammad Kamil Din, Fu Haw Ho

  357-369

  • PDF 208
  • Abstract View  175

• The Study of Thermal Energy Storage for Thermal Comfort Building

  Ahmad Fitri

  599-604

  • PDF 243
  • Abstract View  187

• A Review on The Efficacy of Seashell’s Waste as Alternative Abrasive Agent in Toothpaste

  Marissa Mohd Zulfanis, Dr Shahmir Hayyan Sanusi

  862-874

  • PDF 1235
  • Abstract View  936

• Effect of Tailwater Height on Flow Performance of Sharp Crested Weir on Downstream Countercurrent in An Open Channel

  Mohamad Nur Aliff Mohd Ali, Mas Fawzi Mohd Ali, Siti Natasha Malik Fesal

  403-413

  • PDF 236
  • Abstract View  201

• Optimisation of Printing Process Significant Parameter and Level via Simulation on Printing of Synthetic Leather Substrate

  Thajul Mydin Seeni Iburahim, Rd Khairilhijra Khirotdin

  638-646

  • PDF 276
  • Abstract View  235

• Characterization of Silica from Pasir Puteh, Kelantan Rice Husk for Water Filter Application

  Amirul Eizlan Hadi Bin Abd Aziz, Sufizar Ahmad

  915-920

  • PDF 357
  • Abstract View  340

• A Study of Implementing a Predictive Maintenance Software System for Conventional Machine Based on Internet of Things (IOT)

  He Fu Yap, Prof. Dr. Yusri Bin Yusof

  138-149

  • PDF 352
  • Abstract View  358

• Phase Stability of LSCF/YSZ- SDC & LSCF/YSZ-SDCC Dual Composite Cathode Solid Oxide Fuel Cell

  Nurul Farhana Abdul Rahman, Azzura Ismail, Mohd Azham Azmi, Shahruddin Mahzan, Hamimah Abd.Rahman

  1065-1074

  • PDF 564
  • Abstract View  316

• Review on Life Cycle Analysis (LCA) Studies to Evaluate the Impact of Waste Managing Aluminium on The Environment

  Muhammad Lokman Khairudin, Nur Kamilah Yusuf

  184-192

  • PDF 330
  • Abstract View  272

• A Study Review On Coating For Intermediate Temperature Solid Oxide Fuel Cell (SOFC) And Low Temperature Sofc Using Electro-Phoretic Depositon (EPD) As Interonnect Coating Technique

  Muhammad Amin, Mohd Azham bin Azmi

  738-748

  • PDF 275
  • Abstract View  336

• Extraction of Gelatin from Salmon Skin

  Nurin Faihana, Hasan Zuhudi Bin Abdullah

  230-235

  • PDF 398
  • Abstract View  426

• Applied Internet of Things(IOT) In Temperature and Vibration Monitoring System for Milling Machine

  Nurul Hani Afiqah Mohd Said, Yusri Yusof

  476-485

  • PDF 330
  • Abstract View  335

• Thermal energy harvesting: Parameter tuning of maximum power point tracking algorithm for real-time temperature data from solar irradiance

  Muhammad Nazri Rejab, Ts. Dr

  1009-1019

  • PDF 270
  • Abstract View  257

• Study of Soil Quality (Moisture and pH) Upon the Growth of Okra Plant Using IoT Technique

  Amir Umar Mohd Ridhuan, Ramhuzaini Abd Rahman

  290-297

  • PDF 921
  • Abstract View  457

• Ergonomic Risk Assessments (ERA) on Cycling Posture using Rapid Upper Limb Assessment (RULA) and Rapid Entire Body Assessment (REBA) Method among Cyclists

  MOHAMAD HAFIZUL IKRAM BIN ABDUL HADI ABDUL HADI, MOHD NASRULL BIN ABDOL RAHMAN

  801-811

  • PDF 827
  • Abstract View  740

• Fabrication of Sand Brick with Additive of Waste Thermoplastic Composition

  ZAHIRAH HAMZAH, SAID AHMAD

  338-350

  • PDF 640
  • Abstract View  281

• An Investigation on Dynamic Response of Collision by Multiple Projectiles Towards Multi-Layer Al2024 T3 Aluminium Plate

  Muhammad Haziq Mohd Yassin, Mohd Norihan Ibrahim

  848-854

  • PDF 234
  • Abstract View  239

• An Investigation on The Master Printing Plates Development Attending to Micron Sizes Employing a Flexographic Micro Scalar Printing Technique

  Lisa Yasmine Shariff

  385-392

  • PDF 179
  • Abstract View  215

• Optimization of Curing Process Significant Parameter and Level via Simulation on Curing of Printed Pattern on Synthetic Leather Substrate

  Nur Atirah Atasha Ismail, Rd. Khairilhijra Khirotdin

  623-631

  • PDF 244
  • Abstract View  255

• Development of a Heat Transfer Analysis Software by Using Microsoft Excel

  Jun Chun Soo, Hj. Mohd Azwir bin Azlan, Mohammad Kamil bin Abdullah

  893-904

  • PDF 594
  • Abstract View  385

• A Simulation Study On The Effects of Cutting Fluid in Drilling Process

  MUHAMMAD AMAR IMRAN AZMAN, RASIDI IBRAHIM

  117-123

  • PDF 329
  • Abstract View  195

• The Investigation of Curing Process on Synthetic Leather Substrates

  Nur Atirah Atasha Ismail, Rd. Khairilhijra Khirotdin

  435-443

  • PDF 317
  • Abstract View  285

• Prevalence and Risk Factors of Low Back Pain and Shoulder Pain among Mechanics at Tyre Service Center at Taiping, Perak

  Mazlina Kamarudzaman, Nurul Elyna Asyiqen Mohd Zaki, Mohd Nasrull Abdol Rahman

  1049-1054

  • PDF 363
  • Abstract View  371

• Study on Inhaler Spacer Using ESD-Safe Material

  Anwar Mahmud bin Maklarin, Prof. Madya Dr. Nor Zelawati binti Asmuin

  170-174

  • PDF 268
  • Abstract View  225

• Relation Between Musculoskeletal Symptoms and Ergonomic Risk Assessment Among Mechanics at Car Service Centre: NMQ and REBA

  Nurul Elyna Asyiqen Mohd Zaki, Mohd Nasrull Abdol Rahman, Mazlina Kamarudzaman

  1091-1096

  • PDF 561
  • Abstract View  696

• A Study of Parameter Setting for Signal Warning Detector (SWAD)

  Muhammad Azim Farhi Sarif, Suhaimi Hassan

  209-216

  • PDF 285
  • Abstract View  216

• Design for Manufacturing and Assembly (DFMA) for BBQ Grill Machine

  Alif Qayyum Johari Abd Razak, Mohd Amri

  766-778

  • PDF 1419
  • Abstract View  772

• Tensile Properties of Polyhydroxyalkanoates/Calcium Phosphate through Simulation Analysis

  Farah Yusra Mazlan, Sharifah Adzilla

  261-266

  • PDF 296
  • Abstract View  282

• Computational Analysis of Fit Between Human Head Shapes and Taekwondo Headgear

  Muhammad Adham bin Azman

  502-511

  • PDF 285
  • Abstract View  223

• Modeling and Simulation of Frontal Crash Between Heavyweight and Lightweight Vehicles

  mohd norihan ibrahim, Vivekananta Murali

  795-800

  • PDF 195
  • Abstract View  232

• Life Cycle Assessment of a Bicycle Using Solidworks Sustainability

  MOHAMAD YUSOFF IMRAN Bin Kasmer, Ts. Dr. Fahrul Bin Hassan

  320-326

  • PDF 828
  • Abstract View  747

• Interpretation of Railway On-Train Data of Electrical Train Service (ETS) in Malaysia

  MUHAMMAD AZKI HAFIZI BIN MOHAMED NAZUL, MOHD ZAMANI NGALI, MOHD AZLIS SANI MD JALIL

  559-565

  • PDF 376
  • Abstract View  321

• Optimization of thermoplastic material for plastic injection molding process by using Taguchi method

  Faleq Fitri Ashaari, Sri Yulis M. Amin

  831-838

  • PDF 276
  • Abstract View  241

• An adjustable step stool for stunted people

  Nur Shafiqah Syuhadah Haszhar, Norfazillah Talib

  370-376

  • PDF 312
  • Abstract View  260

• The Development of Tethered Drone Station

  Mohamad Fariz Mohd Fauzi, MOHAMMAD ZULAFIF RAHIM

  605-613

  • PDF 1155
  • Abstract View  748

• Application of machine learning algorithm to prediction of thermal spring back of hot press forming

  Mah Wei Chun, Ng Chuan Huat, Ong Pauline

  875-883

  • PDF 328
  • Abstract View  324

• A Review on Antibacterial Activity of Green Synthesis Zinc Oxide Nanoparticle

  Fauzul Adzim Azlan, Ainun Rahmahwati Ainuddin @ Nordin

  414-423

  • PDF 368
  • Abstract View  314

• Review on The Effect of Zinc Salt on Performance of Polysulfone Material.

  Ahmad Azfar Zuhri Abdul Ghafar, Muhamad Zaini Yunos

  647-659

  • PDF 227
  • Abstract View  196

• Barriers in Adopting Technological Innovation, Organizational Capacity, and Business Environment into Iraq SMEs: A preliminary Study

  Mohammed Faraj Mishaal, Ho Fu Haw

  1032-1040

  • PDF 256
  • Abstract View  391

• A Study on Drone Design for Packages Delivery Services

  Muhammad Zaid Abdul Wahab Hashim, Mohd Fahrul Hassan

  921-928

  • PDF 795
  • Abstract View  545

• The Fabrication of Alginate and Curcumin Biocomposite Film for Wound Healing Applications

  Nur Afiqah Adyani Razak, Maizlinda Izwana Idris

  929-937

  • PDF 281
  • Abstract View  229

• A Review on Effect of Cooling Method and Cutting Tool Geometries on Surface Defect of Carbon Fibre Reinforced Polymer Workpiece by End Milling Process

  Chee Wai Leong, Erween Abd Rahim

  938-953

  • PDF 289
  • Abstract View  273

• Cutting Force of End Milling Carbon Fibre Reinforced Polymer On Different Tool Geometries and Fibre Orientations: A Review A Review

  Wei Ming Ong, Erween Bin Abd Rahim

  954-966

  • PDF 653
  • Abstract View  262

• Design of A Screw Conveyor in Palm Oil Mill Malaysia

  JIA XIN TAN

  967-977

  • PDF 837
  • Abstract View  607

• To Design A Semi-Auto Coconut Peeling Machine

  Muhammad Aliy Afiq Che Anuar, Abd Khalil Abd Rahim

  978-987

  • PDF 2003
  • Abstract View  1262

• Design of Mobile Scooter to Increase Flexibility and User Friendliness

  Zong Wei Goh, Nik Hisyamudin Muhd Nor

  988-997

  • PDF 657
  • Abstract View  482