Vol. 4 No. 1 (2023): RPMME

Articles

• Modelling The Deformation Behaviour of Recycled Aluminium Alloys Reinforced with Alumina Oxide Undergoing Finite Strain Deformation

  C. S. Khoo, M. K. Mohd Nor, N. Ma’at, M. S. A. Samad

  487-494

  • PDF 305
  • Abstract View  226

• A Numerical Analysis of Recycled Aluminium Alloys Reinforced with Alumina Oxide Subjected to High Velocity Impact

  Adam Syauqi Muhammad Rodhi, Mohd Khir Mohd Nor, Norzarina Maat, Mohd Syazwan Abdul Samad

  495-503

  • PDF 318
  • Abstract View  234

• Review On the Biosynthesis of Composite TiO2 - Inorganic/Metal Oxide (Fe2O3): Photocatalytic and Antibacterial Purpose Of Wastewater Treatment

  Jaffner Johngika, Zawati Harun

  504-517

  • PDF 284
  • Abstract View  297

• The Physical Characteristics of Handmade Soap Made Up Using Used Cooking Oil

  MOHD ZAROUL AFIQ MHD ZOL, ANIKA ZAFIAH MOHD RUS

  540-547

  • PDF 1724
  • Abstract View  1372

• Development of A Material Efficiency Assessment Tool for Metal Stamping Product

  ahmed wahib amed thabit

  528-539

  • PDF 164
  • Abstract View  172

• Characterization of alumina foam prepared by space holder method

  Noorhanis Nazuwa Abdullah, Fazimah Mat Noor

  1-8

  • PDF 263
  • Abstract View  212

• Optimizing Process Parameter of Friction Stir Welding on Aluminium Using Response Surface Methodology

  Azriszul Mohd Amin, Aida Arinah Mohamad Idris

  8-18

  • PDF 213
  • Abstract View  227

• Tool Wear Prediction Using Multiple Regression in Turning

  Lee Woon Kiow

  19-29

  • PDF 301
  • Abstract View  216

• Optimization of Machining Time in Milling Process using Genetic Algorithm Method

  haslina abdullah, Norshafinaz Isa

  30-39

  • PDF 300
  • Abstract View  167

• MODELLING AND SIMULATION OF A COMPANY INVENTORY USING ARENA SOFTWARE

  Nursyafiqah Hairullidzam, Salleh Ahmad Bareduan

  40-46

  • PDF 1007
  • Abstract View  444

• Characterisation on grade of waste concrete particle reinforced aluminium AA7075 based composite

  Khaizuran Irfan Zaman, Dr. Noradila

  47-57

  • PDF 204
  • Abstract View  212

• Chicken Wastewater Treatment Using Carbon Filtration

  AMMAR NURHAKIM ROSDAN

  58-66

  • PDF 372
  • Abstract View  196

• Implementation of Single Minute Exchange of Die Method to Reduce Setup Time of Terminal Lead Welding Machine

  Laavankumar Nyana Segaran

  67-77

  • PDF 446
  • Abstract View  300

• Fabrication of Beads and Biofilms Based on Alginate with Iron (III) Oxide, Titanium (IV) Oxide and Copper (II) Oxide

  MAIZLINDA IZWANA IDRIS, Nur Fatehah Mohd Nasir

  78-89

  • PDF 247
  • Abstract View  221

• Physiochemical Properties of Chitosan Biofilm for Wound Healing Applications

  MAIZLINDA IZWANA IDRIS, Nur Syahirah Muhammad Syahrul Goh

  90-104

  • PDF 209
  • Abstract View  235

• A Case Study of An Ergonomic Risk Assessment for Working Posture among Maintenance Workers

  Mohd Nasrull Abdol Rahman, Lay Zhan Yek

  105-114

  • PDF 2107
  • Abstract View  771

• Comparison An Ergonomic Risk Assessment For Repetitive Work Activities On Automotive Workshop Industries Around Parit Raja

  Mohd Nasrull Abdol Rahman, Arvind Maniam

  115-125

  • PDF 689
  • Abstract View  261

• The Cooling Load Calculation Using E20 Spreadsheet and HAP Software for for the Main Entrance Glass Atrium of Shopping Mall Building

  ISMA FATIN ALIA ISA, Ts. Dr. Mohamad Farid Sies

  131-138

  • PDF 4941
  • Abstract View  713

• Design And Proportional Computational Assessment Rectangular Duct Air Conditioning System At Shopping Mall

  Muhammad Nur Alif, Ts. Dr. Mohamad Farid Sies

  139-149

  • PDF 468
  • Abstract View  264

• Investigation on Curing days of Concrete Waste Particle Reinforced Aluminium Matrix Composite

  Anas Nashuha Misran

  150-158

  • PDF 167
  • Abstract View  190

• The Characteristics Study of Palm oil-in-water Emulsion by Adding Gelatine as an Emulsifier Agent

  SULIANA RAPHAEL, Hanis Zakaria

  159-167

  • PDF 401
  • Abstract View  280

• Optimization Of Process Parameter On Friction Stir Welding Of Aluminium 6061 Using Partial Fraction Method

  Azriszul Mohd Amin, Muhamad Syauqi Sofree

  168-180

  • PDF 252
  • Abstract View  178

• Defect Size Comparison Using Infrared Thermography Method and Actual Measurement On Glass Fiber Reinforced Polymer

  Muhammad Hanif Jamil

  181-187

  • PDF 193
  • Abstract View  187

• Analysis and Optimization of a Small-Scale Oceanic Wave Energy Converter

  Mohd Azwir Azlan, Muhammad Hafzal bin Abdul Gani

  188-196

  • PDF 193
  • Abstract View  202

• Investigation of the Efficiency of Motor based on Temperature for Agriculture Application

  MOHAMMAD FARHAN ADLI BIN PAIYADH PAIYADH, Ahmad Hamdan Ariffin

  197-204

  • PDF 547
  • Abstract View  346

• Optimization of Process Parameters for Polylactic Acid (PLA) of FDM Using Particle Swarm Optimization (PSO)

  Sia Chee Kiong, Teu Shieh Em

  205-217

  • PDF 260
  • Abstract View  297

• Design for Manufacturing and Assembly (DFMA) of Handheld Corded Electrical Drill

  Noor Hakim Rafai, Arielson

  218-228

  • PDF 734
  • Abstract View  270

• Optimization of Process Parameter on Friction Stir Welding on Aluminium Alloy 6061 Using Taguchi Method

  Azriszul Mohd Amin, Faieez Nur Ashraf Hassan

  229-237

  • PDF 272
  • Abstract View  217

• Effect of Flux Application on Aluminium-Silicon Alloy (Al-SiMg) Machining Chips for In-Situ Casting Process

  Aslinda Saleh, Azuliana Azwin Azmi, Ain Zubaidah Samian

  238-245

  • PDF 224
  • Abstract View  194

• Design for Manufacture and Assembly (DFMA) of Chainsaw Housing

  Noor Hakim Rafai, Nur Elleanna Najihah Abdullah

  246-251

  • PDF 423
  • Abstract View  253

• Effect of Different Silica Compositions on Water Filter Application using the Slip Casting Method

  SUFIZAR AHMAD, MUHAMMAD SHAHRUL NIZAM, MUHAMMAD SYAHMIE SUFI ABDUL SHUKOR

  252-257

  • PDF 275
  • Abstract View  171

• The Effect of Burning Temperature On Rice Husk From Pasir Puteh And Pasir Tumboh Areas, Kelantan

  SUFIZAR AHMAD, MOHAMAD HAZIQ AFFIF MOHD HISHAM, MUHAMMAD SYAHMIE SUFI ABDUL SHUKOR

  258-264

  • PDF 310
  • Abstract View  183

• The Recycling Aluminium CNC Waste Into Gardening Tools

  Muhammad Izzat Baihaqi Othman, Yusri Yusof

  265-269

  • PDF 263
  • Abstract View  192

• The Effect of Hydrochloric Acid to The Extraction of Gelatin from Salmon Skin

  Hasan Zuhudi Abdullah, Nurdiana Azlan Hisham

  270-276

  • PDF 482
  • Abstract View  266

• Design and Develop Model for Cable Pulling Machine using 0.37kW Motor

  Mohd Nizam Katimon, Muhammad Nur Iman Johari

  277-284

  • PDF 396
  • Abstract View  321

• Investigation on Sand and Cement Particles Reinforcement in Aluminium Matrix Composite (AMC)

  Muhammad Aqil Hamdan, Noradila Abdul Latif

  285-291

  • PDF 345
  • Abstract View  211

• Design a Rainwater Harvesting System for a Bungalow House Suitable for Malaysia Environment

  ahmad fu'ad idris, Megat Saifulnazmi Noor Wira

  292-304

  • PDF 2550
  • Abstract View  370

• Effect sintering temperature on silica production using rice husk from Pasir Tumboh, Kelantan

  Sufizar Ahmad, Muhammad Ikhwan Isamudin, Muhammad Firdaus Muslem

  1-8

  • PDF 254
  • Abstract View  189

• Experimental Study in Compressive Strength with Respect to Different Thicknesses of Composite Material

  Mohd Nizam Katimon, Nur Akmal Hakim

  313-319

  • PDF 193
  • Abstract View  206

• The Designation of Variable Exhaust Nozzle for Micro Gas Turbine

  Muhammad Badrul Amin Mohd Yasin, Hamidon Salleh

  320-325

  • PDF 365
  • Abstract View  192

• Study Energy Consumption and Potential Saving At The Recycle Factory

  Zamri Noranai, Syuib Ab.Ghani

  326-332

  • PDF 332
  • Abstract View  198

• Study of Low Density Polyethylene Melting Process and Energy Saving in Recycling Industries

  Zamri Noranai, Muhammad Muqtadir Azman

  333-338

  • PDF 211
  • Abstract View  183

• Fabrication and Characterization of Hydroxyapatite Bead for Water Filter Application

  Hasan Zuhudi Abdullah, Norazlinda Albi

  339-346

  • PDF 384
  • Abstract View  229

• Improvement of DLA sealing machine monitoring process: mechanical design and prototyping of automatic alert system

  Ramhuzaini Abd Rahman, Muhammad Hariz Mohd Rizal

  347-358

  • PDF 237
  • Abstract View  200

• Effect of Yttrium on Microstructure and Hardness Properties of Aluminium LM30 Alloy

  Siti Sarah Sulaiman, Rosli Ahmad

  359-364

  • PDF 287
  • Abstract View  193

• Computational Fluid Dynamics (CFD) Study on Air Flow of Air Diffuser in a Room

  abdulhafid m a elfaghi, Jeffrey Leong

  365-378

  • PDF 832
  • Abstract View  302

• 3D Printing of Lightweight for Lighter and Denser Parts

  Nasuha Sa'ude, Mustaffa Ibrahim

  379-388

  • PDF 347
  • Abstract View  297

• Simulation and Analysis of PEM Fuel Cell System using MATLAB

  Syasya Nurmaisarah Mohd Hamzah

  389-397

  • PDF 1260
  • Abstract View  819

• The Effect of Nepeta Cataria on Polyvinyl Alcohol as Blatella Germanica Cockroaches Repellent

  Nur Zulaikha Sahira Zulkifli, muhamad Zaini Yunus

  398-403

  • PDF 240
  • Abstract View  268

• Effect of Kapok and Oil Polypropylene

  NUR HASANAH BINTI MOHD BASIR MOHD BASIR, Muhamad Zaini Yunos

  518-527

  • PDF 242
  • Abstract View  177

• The Evaluation For Accuracy of Ultrasonic Non-Destructive Testing In Measuring Thickness on Dissimilar Material By Using A1207 Pen-gauge

  Shahruddin Mahzan, Babie Jane Roger

  404-412

  • PDF 448
  • Abstract View  212

• Corrosion Behaviour of a Low Carbon Steel Piping Exposed to Different Water Conditions

  Shahruddin Mahzan, Rus Izzati Rusli

  413-419

  • PDF 414
  • Abstract View  166

• Design of Banana Pringles Shaping Machine for Small Industry

  Nik Hisyamudin Muhd Nor, Misha Nabila Asnahpon

  420-428

  • PDF 275
  • Abstract View  240

• Design of The High-Productivity of Coffee Cherry Processing Machine for Small Industry

  Nik Hisyamudin Muhd Nor, Fakhrul Najwan Ibrahim

  429-437

  • PDF 754
  • Abstract View  417

• Failure Screening By Using Ultrasonic Tomography Testing Method

  Shahruddin Mahzan, Azizur Rahman Alanu

  438-446

  • PDF 211
  • Abstract View  168

• The Evaluation of Shell-and-Tube Heat Exchanger using Computer Simulation for Oil and Gas Industry

  Muhd. Hafeez Zainulabidin, ALEXIA LUKE LAITI

  447-456

  • PDF 746
  • Abstract View  273

• Evaluation of PVA Performance with Different Enzyme Concentration

  Zakiah Kamdi, Nurul Syafiqah Mohd Zahel

  457-468

  • PDF 397
  • Abstract View  207

• A Finite Element Analysis on Sound Pressure and Pressure Drop on Diesel Generator Sets

  Syaza Mudrikah, Musli Nizam Yahya

  469-473

  • PDF 253
  • Abstract View  262

• Solar Radiation as Energy Source for Plants Water Pumping System

  Raudhah Othman, Muhd Nazrul Hisham Zainal Alam

  474-482

  • PDF 246
  • Abstract View  186

• A Study on Frontal Deformation of Lightweight Vehicle Due to Different Load Impact

  mohd norihan ibrahim, mohamad zafrul hafizi mohd zafir

  483-486

  • PDF 167
  • Abstract View  174

• Design An Irrigation System For Vegetable Farming Suitable For Malaysia Environment

  ahmad fu'ad idris, Ericson Jawi Anak Yunos Allie

  126-130

  • PDF 781
  • Abstract View  365